3. 修改FLASH_CAPACITY地址后导致配对卡死

修改FLASH_CAPACITY地址后导致配对卡死

  • D

    #define FLASH_CAPACITY 0x00800000

    #if FLASH_CAPACITY == 0x00080000
    #define BLE_STACK_KEY_STORAGE_OFFSET 0x7F000
    #define BLE_BONDING_INFO_SAVE_ADDR 0x7D000
    #define BLE_REMOTE_SERVICE_SAVE_ADDR 0x7E000
    #elif FLASH_CAPACITY == 0x00040000
    #define BLE_STACK_KEY_STORAGE_OFFSET 0x3F000
    #define BLE_BONDING_INFO_SAVE_ADDR 0x3D000
    #define BLE_REMOTE_SERVICE_SAVE_ADDR 0x3E000

    #elif FLASH_CAPACITY == 0x00800000
    #define BLE_STACK_KEY_STORAGE_OFFSET 0x7FF000
    #define BLE_BONDING_INFO_SAVE_ADDR 0x7FD000
    #define BLE_REMOTE_SERVICE_SAVE_ADDR 0x7FE000
    #else
    #error "flash capacity configuration error!"
    #endif //FOR_2M_FLASH

    #define FLASH_CAPACITY 0x00800000 对应的是8M 配对后直接就卡死了
    #define FLASH_CAPACITY 0x0080000 对应的是512K 完全可以没有问题
    const struct jump_table_image_t _jump_table_image attribute((section("jump_table_1"))) =
    {
    .image_type = IMAGE_TYPE_APP,
    .image_size = 0x64000, // 400KB reserved
    };
    我的代码固件区域400K
    想问一下这个问题如何解决，多谢多谢

    0
    M
     1 条回复
  • M

    @ding56239
    // <h> FLASH Configuration
    // <o> FLASH_CAPACITY
    // <i> Internal Flash capacity selection, Default: 4Mb
    // <0x02000000=> 128Mb
    // <0x01000000=> 64Mb
    // <0x00800000=> 32Mb
    // <0x00100000=> 8Mb
    // <0x00080000=> 4Mb
    // <0x00040000=> 2Mb
    #define FLASH_CAPACITY 0x02000000

    #define BLE_STACK_KEY_STORAGE_OFFSET (FLASH_CAPACITY-0x1000)
    #define BLE_REMOTE_SERVICE_SAVE_ADDR (FLASH_CAPACITY-0x2000)
    #define BLE_BONDING_INFO_SAVE_ADDR (FLASH_CAPACITY-0x3000)

    0